Dodge Starter Relay Wiring Diagram

Dodge Starter Relay Wiring Diagram: Troubleshooting and Repair

Locating the Wiring Diagram

If you need assistance troubleshooting or wiring your Dodge starter relay, refer to the official wiring diagram for your specific vehicle year and model. These diagrams can be found in your owner's manual or online through various Dodge-certified sources.

Caution: Always disconnect the vehicle's battery before performing any electrical work.

Identifying the Starter Relay

The starter relay is typically located near the battery. It is a small, black box with several electrical terminals. The two main terminals are the "S" terminal, which receives power from the ignition switch, and the "I" terminal, which sends power to the starter solenoid.

Wiring the Starter Relay

To wire the starter relay, connect the following wires to the appropriate terminals:

• Battery Positive: Connect the positive terminal of the battery to the "B" terminal on the starter relay.
• Starter Solenoid: Connect one of the pink wires from the starter solenoid to the "I" terminal on the starter relay.
• Ignition Switch: Connect the other pink wire from the starter solenoid to the "S" terminal on the starter relay.
• Ground: Connect a ground wire from the "G" terminal on the starter relay to a suitable grounding point.

Troubleshooting Starter Relay Issues

If you experience problems with the starter relay, perform the following troubleshooting steps:

• Check Fuses and Relays: Inspect the fuses and starter relay according to the wiring diagram. Replace any blown fuses or faulty relays.
• Test Starter Solenoid: Make sure the starter solenoid is receiving voltage by connecting a test light between the "S" terminal on the relay and ground.
• Check Wiring: Verify that all the wires are properly connected and there are no loose or damaged connections.

If the issue persists, seek assistance from a qualified mechanic.